Rooms built around the instrument.
Materials characterisation labs, 3D printing centres, drone labs and UAV control centres. We plan the space, power, air, safety and data around the equipment, then integrate and commission it.
Pick a facility to see how it is laid out.
Materials characterisation lab
Instruments that measure at the nanometre scale are disturbed by vibration, temperature drift, electrical noise and dust. The room is designed to keep all four out.
What the room needs
- Vibration-isolated instrument floor
- Stable temperature and humidity
- Clean, conditioned power
- Gas storage with extraction
- Data capture from every instrument
3D printing centre
Printers, powders and post-processing each need their own air, power and safety rules. Separating them keeps the print hall clean and the people safe.
What the room needs
- Extraction and filtration per zone
- Inert gas supply for metal printing
- Humidity-controlled material store
- Fire detection and suppression
- Dedicated power for each printer
Drone lab
A netted flight volume lets teams test indoors all year. Battery charging is the main fire risk, so it gets its own fire-rated room.
What the room needs
- Netted indoor flight volume
- Fire-rated battery charging room
- Workbenches with ESD protection
- Motion capture and data logging
- Controlled radio environment
UAV control centre
Pilots, video and communications must keep working when something fails. Power, network and comms are designed with redundancy from the start.
What the room needs
- Redundant power with UPS and generator
- Low-latency network and comms links
- Video wall and pilot stations
- Secure server and comms room
- Access control and recording
The same engineering, for other rooms.
Each facility above is a family. These are the rooms that share its requirements, and that we design the same way.
From the materials lab
Precision, stability, clean air
- Cleanrooms
- Metrology & calibration labs
- Electronics & failure analysis
- Chemistry & sample-prep labs
- EMC & high-voltage test rooms
From the 3D printing centre
Machines, materials, extraction
- Fab labs & makerspaces
- CNC & prototyping workshops
- Composites labs
- Laser cutting & engraving rooms
- Teaching workshops
From the drone lab
Motion, test volumes, batteries
- Robotics & autonomy labs
- Motion-capture studios
- Battery & energy-storage test labs
- Antenna & RF test rooms
- Autonomous-vehicle test bays
From the UAV control centre
Resilient power, comms, screens
- Network operations centres
- Security operations centres
- Crisis & dispatch rooms
- Visualisation & VR rooms
- Simulation & training centres
Not on the list? Describe the instrument and the people who will use it — that is where every design starts.
One team from the empty room to commissioning.
- 01
Brief
The instruments, the users and the experiments planned.
- 02
Concept layout
Zones, flows and adjacencies, agreed before any engineering.
- 03
Engineering design
Power, HVAC and extraction, safety systems and IT.
- 04
Build & integrate
Fit-out supervised, equipment installed and connected.
- 05
Commission & train
Every system tested, and the team trained to run it.
Many of these facilities qualify for EU programmes.
We prepare the technical annex and the budget justification alongside the design.